3d-robotics Quad Ready-to-Fly 2014 User Manual

QUADUnfold arms and legstravel positionRemove the bolt and thumb nut outside the black arms. Rotate each arm into position, insert the bolt through th

+–Attach propellersRemove the rings from the propeller packages. Select the ring with the smaller internal diameter, and insert it into the back of th

4SCharging CompleteConnect the white connector to the 4S port. Join the two yellow connectors together. Secure battery inside the guard bag while char

Flight modesIf you did not order an RC transmitter with your copter, visit 3dr.com/learn for instructions.GPSXStabalizeAltitude HoldLoiterFull Autonom

StabalizeAltitude HoldLoiterFull AutonomyReturn to Launchposition of switch: forward/forwardforward/backno GPS lock requiredGPSXposition of switch: ce

FlyingSelect an open area for flying, away from people and buildings, and remember to bring the flight checklist and a fully charged battery. Follow t

To arm the motors, hold the left stick down/right until the motors spin.6Control your copter in flight using the transmitter’s left and right sticks.

Happy flying!QUAD Operation Manual V3 | ©3D Robotics, Inc. | 21 March 2014Learning moreTo learn more about the APM:Copter platform, including addi